![]() ![]() This window appears and shows the configuration summary configured by the user. Specify the static IP address with the corresponding subnet mask for the interface and click Next.Ĭonfigure the default routing with optional parameters such as the next hop IP address (192.168.1.2 as per network diagram) supplied by the ISP and click Next. Select Serial interface 2/0 (desired) from the Available Interfaces option and click Next.Ĭhoose the encapsulation type for the serial interface and click Next. Note: For other types of interfaces like Ethernet, choose the respective interface type and proceed by clicking the Create New Connection button.Ĭlick Next in order to proceed once this interface appears. The green circles show the features supported in this router and the red circles show the features not supported.Ĭhoose Configure > Interfaces and Connections > Create Connection in order to configure the WAN connection for the interface.Īs an example, for serial interface 2/0, choose the Serial option and click Create New Connection. ![]() The SDM Home page provides information such as hardware and software of the router, feature availability, and a configuration summary. Interface ConfigurationĬomplete these steps in order to configure the interfaces of a Cisco router.Ĭlick Home in order to go to the SDM Home page. They are RFC 1918 addresses which have been used in a lab environment. Note: The IP addressing schemes used in this configuration are not legally routable on the Internet. In this section, you are presented with the information to configure the basic settings for router in a network. Refer to the Cisco Technical Tips Conventions for more information on document conventions. For information on which routers are suppoted by Cisco CP, refer to the Supported Routers section of the Release Notes for Cisco Configuration Professional 2.5. Note: If you use a Cisco Integrated Service Router (ISR), refer to Basic Router Configuration Using Cisco Configuration Professional for similar configuration details with more powerful features. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment. The information in this document is based on these software and hardware versions:Ĭisco 3640 Router with Cisco IOS ? Software Release 12.4(8)Ĭisco Security Device Manager (SDM) Version 2.3.1 Note: Refer to Allowing HTTPS Access for SDM in order to allow the router to be configured by the SDM. This document assumes that the Cisco router is fully operational and configured to allow the Cisco SDM to make configuration changes. Cisco SDM allows you to configure your router in all kinds of network environments that includes small office home office (SOHO), branch office (BO), regional office, and central site or Enterprise headquarters using an easy-to-use web-based management interface. This includes the configuration of the IP address, default routing, static and dynamic routing, static and dynamic NATing, hostname, banner, secret password, user accounts, and so forth. This document describes how to use the Cisco Security Device Manager (SDM) in order to set the basic configuration of the router. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |